Pro Cue Single Face Splice Snakewood and Maple Veneer
This design is a Pro Cue Single Face Splice Snakewood and Maple Veneer and is a magnificent piece as you can see! As you’ll see from the images the ash is very good as is the splicing and wood selected.
Craftsmanship is a big thing i make sure that we keep perfecting in cue builds and these are certainly true class.
The pro cue is a one piece design but has the ash go through to the bottom of the cue and you’ll see a square section of ash. This makes the butt have much more strength than a standard one piece cue which uses a 44-48 inch shaft and splicing.
Playability wise it plays a lot stronger and of course costs three times more to make. Many cue makers are also now getting onto this with some companies just adding dowels into shafts to make them look like they are full length to sell at higher costs.
This listing has various selections as per the cue specifications. Once you check the cue images you’ll notice the great craftsmanship of our cue makers. There’s many selections available on the configuration area and if your wanting to design your own then check it out.
- CC-457 – 57 inches, 9.49 ferrule titanium, 29.6mm butt, 17.85 ounces, 17 inch balance point | + 23 inch telescopic, 6 inch solid extension and Cue Case -SOLD
- CC -454 – 57 inches, 9.48 ferrule titanium, 29.36 butt, 17.88 ounces, 17.25 balance point| + 23 inch telescopic, 6 inch solid extension and Cue Case
- For all Cue Creator® cues purchased we’re also giving a free Aluminum cue case so we have peace of mind when sending.