Cue Creator Four Secondary Splices Plus 1 Veneer
The design in this we’ve picked a Cue Creator Four Secondary Splices Plus 1 Veneer. For this design we have used the North American ash shaft with ebony butt with sea green veneer and four secondary splices of ovangkol.
This cue has a three-quarter joint and uses our newly developed joint which has far less side to side movement than others in the current marketplace.
The three-quarter cue has a ferrule size of 9.5mm with a 29.5mm butt and a 58-inch cue length and a weight of 18.5 ounces. On this cue we have picked the standard flat spot or chamfer depending on the terminology you would like to use.
Note: all cues come with serial number engraved in cue and certificate and cues will be registered on the website before sending.
Veneer colours may have changed over time, some of them may have been replaced with new colours.
- Length:58 inches
- Weight: 18.5 ounces
- Ferrule: 9.5mm
- Butt Diameter:29.13mm
- Tip : Cue Creator Medium ( Pressed tip)
- Configuration: Three Quarter
- Shaft Wood: North American Ash
- Butt Design: Four Secondary Splices in Ovangkol + one veneer in Sea Green
- Butt Wood: Ebony
- Butt end: Chamfer
- Balance point 18 inches from butt end
- For all Cue Creator® cues purchased we’re also giving a free Black Aluminum cue case so we have peace of mind when sending.